REC ACCESSORIES

EV products and other additional accessories available with REC BMS.
For ordering any product, please contact us or write us an email to info@rec-bms.com.

pikaREC.png

Wi-Fi MODULE FOR REC BMS

Wi-Fi module for REC BMS allows you to control your power on your favourite device using Wi-Fi network. Battery pack parameters such as voltages, current, temperatures, state of charge (SOC) and state of health (SOH) are displayed. It allows BMS settings and parameters setup, also used for BMS firmware updates. It fully substitutes PC Software BMS Master Control or BLE module. As an addition LCD touch display for REC BMS can also be used at the same time as an extension to the system design.

  • allows BMS settings setup
  • connects to RS485 BMS port
  • for all “smart” devices using wi-fi network
  • connects to an existing network or sets up its own
  • an alarm pop-up sign to inform the user in case of errors
  • parameters and error logging with analyzer
  • user customised view (html code)
pikaREC.png

LCD TOUCH DISPLAY FOR REC BMS

To keep it all handy, we have developed pocket-sized LCD touch display to view (and control) all system’s parameters at all times. With the size of 2.8” touch screen it is suitable for integration in any cockpit of the electric/hybrid vehicle equipped with REC BMS.

  • robust and small design
  • touch screen display
  • low power consumption
  • main parameters view tab
  • 4 sub-menu tabs
  • settings-menu tab
  • portrait or landscape view
  • automatic or manual backlight settings
  • hibernate timer
  • reverse polarity supply voltage protection
  • under and over-voltage protection
  • easy to use
  • fits in any cockpit
  • aluminum enclosure
pikaREC.png

PC SOFTWARE BMS MASTER CONTROL

User friendly application BMS Master Control offers live view of system’s parameters, allows you to change settings, set the maximum and minimum voltage values, monitor the behaviour of your system during the operation, logging while testing the system and tracking the system’s history.

  • system parameters overview
  • BMS settings setup
  • data logging and controling
  • perfect for testing the system’s performance
pikaREC.png

PRE-CHARGE UNIT

Pre-charge unit is a device that charges the input capacitors of the system components before the main contactor switches on. Pre-charge device eliminates high inrush currents at the switch-on of the contactor and prolongs the contactor lifespan dramatically

  • low power consumption
  • integrated 66 Ω power resistor
  • 2 A contactor coil drive
  • 120 V DC max system voltage
  • time set of 2/4/8/12 s delay
  • reverse polarity protection
  • over-voltage protection
  • suitable for 12, 24 and 48 V systems (11-68 V DC)
pikaREC.png

BI-STABLE LATCHING RELAY DRIVER

Bi-stable latching relay driver (BSLRD) is an electronic device that drives bi-stable dual coil latching relays.

  • Bi-stable and mono-stable latching relay driver
  • 62 V DC max supply
  • 6 A coil drive with over current protection
  • 100 ms set/reset pulse
  • robust and small design IP 66
  • extremely low power consumption
  • reverse polarity protection
  • over-voltage protection
pikaREC.png

CURRENT SENSOR SHUNT

For precise current measurement we are choosing Shunt current sensor.

  • for measuring DC currents from 5 A to 1200 A
  • rated accuracy ±0.25% max
  • sensing element: Manganin
  • operating temperature –40 to + 60°C
pikaREC.png

KILOVAC EV200AAANA and EV200ADANA CONTACTOR

Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry.

  • EV200AAANA 12 V system
  • EV200ADANA 48 V system
  • Load Current Inductive: 500 A
  • Load Current Resistive: 500 A
  • Operating Voltage: 900 VDC
  • Contact Configuration: SPST-NO

For ordering any product, please contact us or write us an email to info@rec-bms.com.