REC Q BATTERY MANAGEMENT SYSTEM 16S

Our REC BMS Q series with integrated CAN communication
protocol can manage up to 16 cells in series.

REC Q BMS 16S

REC Q BMS:

  • for up to 16 cells in series
  • single cell voltage measurement (0.1 – 5.0 V, resolution 1 mV)
  • single cell - under/over voltage protection
  • single cell internal resistance measurement
  • SOC and SOH calculation
  • over temperature protection (up to 3 temperature sensors)
  • under temperature charging protection
  • passive cell balancing up to 0.9 A per cell
  • shunt current measurement (resolution 19 mA @ ± 500 A)
  • galvanically isolated user defined multi-purpose digital input/output
  • reduced 1 s measuring interval
  • balancing transistors defect check @ restart
  • EEPROM memory data corruption check @ restart
  • cell's voltage RMS voltage measurement
  • self calibration @ restart
  • BMS shutdown @ 0.98 x minimum cell disconnect threshold
  • Ah counting

RS - 485 communication:

  • galvanically isolated RS-485 communication
  • fully compatible with REC LCD touch display and PC user interface BMS Master control

Galvanically Isolated CAN:

  • galvanically isolated CAN
  • 100, 125, 250, 500, 1 MHz bit-rate selection
  • message programming
  • disable option

Dimensions:

  • length with connectors = 104 mm
  • width with mounting pads = 190 mm
  • width = 165 mm
  • height = 39 mm
  • mounting hole diameter = 4.5 mm

    • We suggest M4 screws for mounting.

REC Q BMS 16S by rec-bms on Sketchfab